Zo, druk bezet weekend. Gisteravond naar Arie geweest. Ik heb besloten over te gaan naar ZEO.
IK heb de spullen er voor aangeschaft na beraad met zeovit zelf, wat nu de beste manier is van aanpak.
Ik ga zeker geen dingen overhaasten aangezien de bak op zich heel goed draait op de manier zoals ik het nu doe. Maarja,...men blijft streven he.
Steenkoralen en alles groeien als kool, maar ik wil kijken of ik op deze manier de kleuren net dat beetje meer kan geven.
Advies van ZEO is rustig aan beginnen.... dus dat ga ik ook doen. Het zal nu niet stel op sprong gaan, want ik ga eerst langzaam afbouwen wat ik nu verbruik. De Wodka zal ik langzaam naar beneden halen en ook het gebruik van Rowaphos.
Zie hier het commentaar van de ZEO-HEAD himself

:
First start with the basics products to decrease nutrients:
1. Place 0.5 liter zeovit in a Zeo Reactor. Water flow around 200 liters per hour. Connect the reactor pump to a clock timer and run the reactor pump with a 3 hour on / 3 hour off / 3 hour on interval. Please make sure the zeolite is not exposed to air while the pump is switched off. Clean the material daily. Leave the zeolite 4 weeks in the filter until you do the first change out. This is the first changing interval, others could be lengthen to 6 – 8 weeks.
2. Place 0.2 liters activated carbon in a filter sock and keep it in a passive water flow in your sump, changed every 30 days. Knead the carbon daily to keep the surface clean. Most users get perfect results with korallenzucht carbon.
3. Dose 2 drops ZeoBac daily for the first 2 weeks, flowed by a 2 – 3 x weekly dosage of 2 drops each. Dose 0.15 ml ZeoStart 2 x daily (morning & evening). Dose those in front of the Zeo reactor pump while it is switched on.
4. The additional dosage of some food source for the corals works fine. I would recommend to dose 1 drop Pohls Coral Vitalizer every other day directly in the tank.
Later on you could use the additional products for coral coloration. Adjust your skimmer to skim wet, keeping it clean to export as much as possible. Do a weekly water change of 5 – 10 % with a good salt.
With the system it is not recommended to use a PO4 absorber. I would highly recommend to reduce the absorber over a 4 week period step by step to zero, monitoring the PO4 level regular. Also reduce the alcohol dosing to 50 % and than reduce the quantity daily to zero over another 2 weeks.
Basic water parameters are not 100 % ideal, try to adjust them slowly and keep them as stabile as possible close the NSW in the following ranges before starting with the system:
KH 6.5 – 7.5
Ca 400 – 420 mg
Mg 1250 – 1300 mg
K+ ~ 380 mg
For a nutrient poor environment K+ (potassium) seems to be a important element. I would recommend you to get a test kit for this element also, posting your results.
Not sure about the sand filter you have described but it might be remover later.
This is a start-up dosage which might have to be adjusted later.
Na veel lezen op dit en andere forums heb ik besloten er van uit te gaan dat het element K+ voldoende in mijn bak aanwezig zou zijn, aangezien ik een strikt waterververs regime handhaaf (elke week meer als 10%) met RC, dit zout zou voldoende K+ bevatten.
Ook zal ik dus volgens hen het actieve filteren over kool , nu met een wervelbed, moeten veranderen naar een passieve manier van filteren. Gewoon een zakje in mijn sump.
Zie volgend commentaar van ZEO waarin ik vraag waarom actieve manier van filtering niet goed zou zijn:
Hi Marc & With many chemical/nutrient changes going on with beginning ZEOvit, the passive use of carbon in established tanks is recommended. After the first zeolite exchange, you can move to active use, but usie 1/2 the amount recommended passively.
Dus ook dat gaan we aanpakken. 1 voordeel, ik hoef mijn wervelbedfilter niet weg te doen, aangezien ik daar later weer op kan overschakelen.
Draadje op Zeovit.com:
http://www.zeovit.com/forums/showthread.php?p=215715&posted=1#post215715